Parallel control cabinet is a complete set of equipment designed for parallel power generation of generator sets. When two or more generator sets are combined to supply power to the load, or when one or more generator sets are combined to supply power to the grid, additional generators are required to be connected to the grid to enable the system to achieve combined power supply. requirements to make the generator work normally. At the same time, it provides comprehensive monitoring, protection and fault diagnosis functions for engines and generators.

1.Manual / self-starting selection (in the case of mains failure, one unit can be given priority or all units can be started at the same time)；

2.Emergency stop control for diesel generators；

3.Fully-automatic parallel closing (you can set a certain unit priority, and automatically open another unit when the load reaches the set value)；

4.Automatic average active load, load unbalance proportional adjustment, automatic frequency tracking；

5.Reverse power, over power detection and alarm shutdown protection, unit short circuit and over current protection；

6.Automatic synchronization detection；

7.Mains automatic charging and charging failure alarm function, non-difference distribution of active and reactive loads；

8.When the mains power is normal, all unit breakers of the mains power transmission system are controlled by the control system to control all the brakes. The units enter the no-load cooling idle state. When the cold time arrives, all units stop running and resume the automatic standby state.